( Dwyer )
|
| General: | | Essential for industrial environments, the Series 1800 combines small size and low price with 2% repeatability for enough accuracy for all but the most demanding applications. Set point adjustment inside the mounting stud permits mounting switch on one side of a wall or panel with adjustment easily accessible on the opposite side. UL and CSA listed, FM approved. | | Specifications: | | Service | Air and non-combustible, compatible gases. | | Temperature Limits | -30 to 180°F (-34 to 82.2°C). 1823-00, -20 to 180°F (-28.9 to 82.2°C). | | Pressure Limits | 10 psig (68.95 kPa) continuous, 25 (172.4 kPa) psig surge | | Switch Type | Single-pole double-throw (SPDT) | | Repeatability | ±2%. | | Electrical Rating | 15 A @ 120-480 VAC, 60 Hz. Resistive, 1/8 HP @ 125 VAC,1/4 HP @ 250 VAC, 60 Hz. De-rate to 10 A for operation at high cycle rates. | | Electrical Connections | 3 screw type, common, normally open and normally closed. | | Process Connections | 1/8˝ female NPT | | Mounting Orientation | Diaphragm in vertical position. Consult factory for other position orientations. | | Set Point Adjustment | Screw type inside mounting spud. | | Weight | 1 lb, 5 oz (595 g). |
|
|
|
|
