PDFPrintE-mail
Milliamp Calibrator-MACALIProcess Calibrator-CAL30i

Multi-Cal Pressure Calibrator-MCI

( Dwyer )
Feature:
  • Series MC Portable Multi-Cal Pressure Calibrator performs a wide variety of simple and complex pressure based measurement,  test, and calibration operations. Modular sensor design allows user to  select  pressure  measurement  range  for  application  flexibility.
 
  • Calibrator can accommodate up to two interchangeable pressure  modules (sold separately below) in any combination of range or accuracy.
     Simultaneously display two separate measurements on the two line, alphanumeric display. Readings can be displayed in a choice of 12 pre-programmed  engineering  units  or  any  single  user-defined  unit.
 
  • Calibrator features min/max recall, hi/lo alarm, percentage of full scale pressure readings, mA/voltage measurement, leak rate and pressure decay measurement, switch testing capabilities, including trip point and dead band, and velocity/volume flow rates.
 
  • Quickly document calibration procedures using the data logging feature which stores up to 384 sets of pressure and time/date stamped measurements. Easily upload stored data to an IBM compatible computer via the RS232 port. Calibrators and modules include certification to NIST traceability—ideal as a secondary standard for calibrating pressure equipment.
 
  • Multi-Cal Pressure Calibrator includes utility software, test leads, protection module, adjustable hand strap, AC adapter, two 9V bateries, instruction manual, and hard carrying case.
  
Specifications:
ServiceClean, dry, nonconductive, noncorrosive gases.

AccuracyDifferential Pressure Modules: ±0.06% FS, Gauge Pressure Modules: ±0.05% FS, Voltage Input: ±0.025% FS @ 0/10 VDC, ±0.10% FS @ 0/30 VDC, Current Input: ±0.03% FS @ 0/20 mA, ±0.05% FS @ 0/50 mA. 
Sensitivity±0.002% of span with dampening 1 part in 50,000 (max). 
RepeatabilityRanges ≤0/2 psi: ±0.05% of span, Ranges ≥0/5 psi: ±0.02% of span. 
OutputRS232 serial interface, 9-pin. 
Alarm OutputSPST form C 110 VDC, 120 VDC (max.), 1 A (max), 30 W, 62.5 VA (resistive). 
DisplayAlphanumeric LCD, 0.37" (9.5 mm) height per line, 2 lines, 16 characters/line. 
Display Update100 msec. 
Ambient Operating Temperature32 to 120°F (0 to 49°C).
Storage Temperature- 4 to 158°F (-20 to 70°C). 
Process Connection1/8” female NPT. 
Electrical ConnectionsMiniature recessed banana jacks.
Power RequirementsInternal: two 9 VDC alkaline batteries, External: AC adapter 9 VDC, 500 mA. 
Battery Life30 hours (approximate). 
WeightCalibrator: 2.2 lb (1.3 kg), Pressure Module: 0.5 lb (0.3 kg).





Back